HobbyKing FPV 250

The OLH-360 is ready! Today I tested the 3D printed mini octocopter in my garage due to the bad weather outside. Default APM pid setti...

The delivery for all 8 DYS 1806 2300kv brushless motors took some time. Equiped with a Gemfan 5030 prop I should reach a 3 on 1 Trust to...

The installation of the electronic parts continues. I have made a PCB on which I inserted the OSD an VTX. This to avoid a bunch of cable...

A quick status update on the FPV 250 Style octocopter I'm currently building. This mini octocopter called OLH-360 will have a low ...

Something else now. My next project is a small OCTO copter. Why? Because I would like to have a multirotor that is able to continue flig...

This is FPV250 low hung frame equiped with a fatshark fpv camera set. The fpv camera is mounted in the clean section of this frame. As ...

The HobbyKing "low hung clean and dirty kit" is created to reduce vibrations on fpv camera. This frame divides the quad in 2 par...

In my first quadcopter project I already introduced some cheap and easy to build motor mounts that reduce vibration almost completely. ...

This is my current FPV 250 setup it does fly but it has vibration issues causing it be a little bit unstable (wobble). If I would mount FP...

The Hobbyking FPV250 multirotor frame is a very popular frame. Because it is light, strong and cheap. Currently this frame comes in 3 flavor...